The Mighty Vaporizer is hands down one of the best vapes on the market, if not THEE best available right now in Australia. So you just shelled out on the best vaporizer on the market, now what? A little TLC goes a long way in keeping that grime and dirt to a minimum and keeping your Mighty vaporizer in pristine condition for many years to come.
Maintaining your Mighty Vaporizer
How often you’ll have to clean your Mighty really comes down to how much you use it, but we recommend you take the time to clean your device at LEAST once a week. If you feel like the airflow is starting to get a little dodgy and you’re experiencing some draw resistance, that’s the red flag flying and telling you that your Mighty needs a clean.
If you’re cleaning your Mighty vape for the first time read on for some top tips on getting your Mighty vape back into fighting form.
Step 1. -If you’ve been a diligent vaper then you shouldn’t have to worry too much about your oven. Giving this a little clean after each session wouldn’t hurt. To give it a thorough clean turn the Mighty vaporizer upside down. Get a swab soaked with isopropyl alcohol and clean it out. NOTE - Make sure that none of the alcohol drips into the heating element which can be bad news for any vaporizer.
Step 2. - Using the tools provided in your Mighty kit, take apart all removable pieces of your vape. Remove the cooling unit on the top of your vape by unscrewing it until it's loose.
Step 3. - Remove the mouthpiece by rotating it until it comes loose and comes off, and then remove the blue seal ring around it.
Step 4. - Unlock the cap lock and remove it by pushing it to one side and pulling it up on the other side.
Step 5.- Separate the top of the cooling unit from the base, expose the 2 blue seal rings. Use the filling chamber tool to remove the blue seal rings, and to pop out the chamber screen.
Step 6. - Remove the lower screen within the filling chamber, use the filling chamber tool and create dent motions until it pops loose from the sides of the chamber, where you can then turn it upside down and let it pop off.
Step 7.- Soak all removable parts of your vape in isopropyl alcohol EXCEPT for the cap lock. Soak these parts for around an hour.
Step 8. - While your removable parts are soaking, use a cotton bud soaked in a little isopropyl alcohol to swipe away any herb debris in the chamber.
Step 9. - Insert a new screen into the filling chamber, pressing down with your filling tool.
Step 10. - After an hour, rinse all removable parts with warm water and dry thoroughly before reassembling. Just like that, your Mighty Vaporizer is now ready to rock again!